Seal Kit for Front Roll-Up Windows [Vanagon]

Replace those cracked and brittle front door window seals with this great little kit, which features the three seals that need to be replaced most often.

Includes:
• (1) Top/Rear Felt Channel
• (1) Front Felt Channel
• (1) Outer Window Scraper

This will reseal the roll-up window in the front door from the outside elements. Kits are side specific, so please choose left or right from the menu above. If you need to reseal BOTH sides, you'll need to add two (2) of these kits to your shopping cart, one LEFT and one RIGHT. NOTE: When replacing your outer scrapers, we strongly recommend replacing your inner scrapers—so we've created that option!

Installation note: The seals in this kit are WITHOUT the molding groove. If your window has the chrome molding on the outside, you will need to remove the chrome from the areas that the new seals occupy. With the old seals out, starting at the back, pull the chrome molding off the door completely, working along the top and bottom edge toward the front. When you get to the wing window seal, cut the molding where it meets the new seals. The idea is for the wing window seal to retrain the chrome molding, but have it end where it meets the new seals. See additional photo for an example.

VIEW THE INSTALL TIPS VIDEO!